|
Admir Ovens was founded
25 years ago by Mr. Quayum Khan. Today Admir Ovens is the biggest
quality industrial oven manufacturer in India manufacturing all
types and all sizes industrial plant, Fully Automatic Diesel or Gas
Fired (Indirect) Travelling Ovens for all varieties of quality
biscuits/bread/rusk (Toast) baking according to International
standards to produce both hard and soft dough variety biscuits to
any capacity for a varied variety like sweet, salty, Marie, thin
arrow root, cream crackers, Enzyme crackers and all sorts of cookies
etc. The temperature profile for each variety of biscuits, bread,
rusk (Toast) etc. is automatically maintained as per requirements.
Biscuit baking oven
Construction:
The oven body consists of steel steamtight tunnel with equally
divided zones of the radiators. Stainless steel expansion joints are
provided between these zones in order to eliminate the expansion of
the oven section. The inspection doors are provided for inspection
of the baking goods during the process. 
Firing Chambers:
The complete chamber will be insulated with minerwoll filled from
outside to conserve heat and increase efficiency. The fully
automatic imported burner shall be fitted to the chamber and the
temperature shall be controlled by automatic temperature controller
on the control panel.
Insulation:
The complete oven will be covered with 10" thick mineral wool
insulation from top, bottom and the sides. The bottom portion of the
oven at the sides will be covered with CRC sheets for the conveyor
protection and to avoid heat loss.
Baking System:
The baking in the heating chamber takes place by radiators located
under and above the wire mesh band which distribute heat for uniform
baking. The recirculation heating gases of these radiators can be
controlled for each zone separately. The closed recirculation system
is having slight vacuum so that combustion gases can not enter into
the baking chamber. The ventilating fan is for circulation of the
heating gases through the recirculation system and thermostatically
controlled burners provide the set temperature of the heating gases.
Fans:
All the circulating fans are fabricated from M.S. & S.S. and will be
well balanced to avoid vibration and will give noise free operation
in high speeds.
Contact
Now |
